![Bubble level](/images/new-backgrounds/195838/19583817x1.webp)
Bubble level
Thistool is equippedwith a bubblelevelto aid
in holdingthe tool horizontally.Simply center7Bubble level the bubble in the sight window.
Screwdriving operation
Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool slowly and then increasethe speed grad- ually. Release the trigger just as the screw bottoms out. The electric brakewill then stop the tool immediately, preventing the screw and/or bit from being damaged.
NOTE:
0 Make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit
may be damaged. | I | ||||
When driving wood screws, predrill pilot | |||||
Nomlnal dlameter of |
| Recommended size | |||
holesto makedrivingeasier andto prevent | wood screw (") |
| of pilot hole (mm) | ||
|
| ||||
splitting of the workpiece See the chart. | 3 1 ( 1 1 8 ) |
| 2 0 - 2 2 | ||
I | (5164- 3 / 3 2 ) | ||||
|
|
| |||
| 3.5 | (9164) | 2.2 - 2.5 | ||
| (3132 - 3132) | ||||
|
|
| |||
| 3.8 (5132") | I | 2.5 - 2.8 | ||
| (3132 - 7/64) | ||||
|
|
| |||
| 4.5 (11164") | I | 2 9 - 3.2 | ||
| (7164- 118) | ||||
|
|
|
9