Exhaust cover
Pliers
Nail
Nail guide
Air exhaust
Air exhaust direction can be changed easily by rotating the exhaust cover. Change it when necessary.
Jammed nailer
CAUTION:
•Always disconnect the hose before cleaning a jam. When the nailer becomes jammed, do as follows:
Use pliers to bend the jammed nail so that the nail head comes out of the nail guide. Then remove the jammed nail. After removing the jammed nail, make sure that the nail guide and the contact arm move smoothly.
Hook
Hex wrench 3
Press up
Hook
The hook is convenient for hanging the tool temporarily. This hook can be installed on either side of the tool.
To remove the hex wrench 3 from the hook, press up on the end of the hex wrench as shown in the figure.
CAUTION:
•Always disconnect the hose when hanging the tool using the hook.
•Always tighten the hook securing bolt firmly.
•Never hang the tool on a waist belt or the like. Dangerous accidental firing may result.
Nails
Avoid storing nails in a very humid or hot place or place exposed to direct sunlight.
14
