Makita BHR200 instruction manual Specifications, Symbols

ENGLISH (Original instructions)

SPECIFICATIONS

	Model		BHR200
		Concrete	20 mm
Capacities		Steel	13 mm
		Wood	27 mm
	No load speed (min-1)		0 - 1,100
	Blows per minute		0 - 4,700
	Overall length		316 mm
	Net weight		3.8 kg
	Rated voltage		D.C. 24 V

•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

•Specifications and battery cartridge may differ from country to country.

•Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-4

Symbols

The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ･ Read instruction manual.

Cd	･ Only for EU countries
Ni-MH	Do not dispose of electric equipment or
Li-ion
	battery pack together with household
	waste material!
	In observance of European Directive
	2002/96/EC on waste electric and
	electronic equipment, 2006/66/EC		on
	batteries and accumulators and waste
	batteries and accumulators and their
	implementation	in accordance	with
	national laws,	electric equipment	and

battery pack that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

ENE043-1

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined according to EN60745:

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 14.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiseling

Vibration emission (ah,CHeq) : 12.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

•The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.

•The declared vibration emission value may also be used in a preliminary assessment of exposure.

Intended use

The tool is intended for hammer drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.

ENG905-1

Noise

The typical A-weighted noise level determined according to EN60745:

Sound pressure level (LpA) : 87 dB(A)

Sound power level (LWA) : 98 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

WARNING:

•The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.

•Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).

2