P 12/ 14
Repair
[3] DISASSEMBLY/ASSEMBLY
ASSEMBLING
Refer to Fig. 47.
Fig. 47
Fit the protrusion of Switch into Oval hole of F/R change lever and assemble them to Housing L.
protrusion of | oval hole of | |
F/R change | ||
Switch | ||
lever | ||
|
Wave washer 15
Do not forget to put Wave washer 15 in place for holding Ball bearing 607DDW on the commutator end of Armature.
Housing set (L)
Battery housing set (L)
Terminal
Assemble Cushion to Battery housing set (L) at the rear side of Terminal.as illustrated above.
Pass Pin 1.5 through Rubber pin 5. And then, assemble them to Battery housing set (L) as illustrated right.
Pin 1.5
Rubber pin 5
