| 003319 |
1 | 3 |
2 |
|
4 | 5 |
1.Protrusion
2.Dust spout
3.Dust bag
4.Entry port
5.Hole
Dust bag
The use of the dust bag makes sanding operations clean and dust collection easy. To attach the dust bag, fit the bag’s entry port onto the dust spout on the tool. Make sure that the hole in the bag’s entry port is just over the
For the best results, empty the dust bag when it becomes approximately half full, tapping it lightly to remove as much dust as possible.
OPERATION |
|
003335 | Sanding operation |
| CAUTION: |
| • Never run the tool without the abrasive paper. You may |
| seriously damage the pad. |
| • Never force the tool. Excessive pressure may decrease |
| the sanding efficiency, damage the abrasive paper or |
| shorten tool life. |
| Hold the tool firmly. Turn the tool on and wait until it attains |
| full speed. Then gently place the tool on the workpiece sur- |
| face. Keep the pad flush with the workpiece and apply slight |
| pressure on the tool. |
MAINTENANCE
CAUTION:
•Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other mainte- nance or adjustment should be performed by Makita Autho- rized or Factory Service Centers, always using Makita replacement parts.
7
