Necessary Repairing Tools

P 2/ 5

Repair

CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.

Description	Use for
Socket bit 8-55 (width across flats: 8mm)	Disassembling/ Assembling M5-8 Hex nut for Fan 95

[2]-1. Fan, Armature

DISASSEMBLING

(1)Remove Carbon Brush as illustrated in Fig. 1.

Fig. 1

Remove two Holder cap covers by levering up with Slotted screwdriver.

Holder cap cover (2pcs.)

Remove two Brush holder caps and Carbon brushes.

Carbon brush Manual background

Brush holder cap (2pcs.)

(2) Separate Housing set (R) and take out Motor section as illustrated in Fig. 2.

Fig. 2

Remove 13pcs. of 4x18 Tapping screws. And separate Housing set (R) from Housing set (L).

Housing set (R)

Separate Motor section (Endbell complete, Armature, Yoke unit, Fan 95) from Housing set (L).

Note: Do not lose Hanger

Housing set (R)

Hanger	Housing set (L)

Motor section

(3)Fan 95 and Armature can be replaced as illustrated in Fig. 3.

Fig. 3

1.Separate Motor section from Endbell complete.

Endbell

complete

2. Hold Fan 95 by hand and turn M5-8 Hex nut for Fan 95 clockwise using cordless impactdriver with Socket bit 8-55.

Note: M5-8 Hex nut has a left handed thread.

Yoke unit

Socket bit 8-55 Cordless impactdriver

Armature

Fan 95

Flat washer 8

Fan 95