P 3/ 5
Repair
[2]DISASSEMBLY/ASSEMBLY
ASSEMBLING
Take the disassembling step in reverse.
Note: 1) Do not forget to set Flat washer 5 and Flat washer 8 in place. (Fig. 3)
2)Fit two notches of Yoke unit to two protrusions on Housing set (L). (Fig. 4)
3)Before assembling Housing set (R), mount Hanger on Housing set (L) and (R). (Fig. 2)
Fig. 4
Fan 95
twoprotrusions of Housing set (L)
two notches
of Yoke unit
[2]-2. Switch unit
DISASSEMBLING
(1)Remove Housing set (R) from Housing set (L). (Figs. 1 and 2) It is not necessary to remove Motor section.
(2)Remove Switch unit by disconnect Connectores as illustrated in Fig. 5.
Fig. 5
Switch unit | Housing set (L) |
Connector of Switch unit
Connector of Controller
Controller
ASSEMBLING
Take the disassembling step in reverse.