Makita DA3000DW instruction manual Screwdriving

0 Use cutting lubricant on the bit to facili- tate! drilling if necessary.

Screwdriving

Phillips bits

Select your screws and nominal dia- meter with the chart on the right.

ItemNominal Diameter (mm)

Bit No. Wood Screw

2.1- 2.7(3/32" - 1/8")

3.1- 4.5(1/8" - 3/16")

Slotted bits

Select a slotted bit to match the slot on the screw heads. If the bit is too small for the screw slot, the bit and/or screw head may be damaged.

Overload protector

0 The overload protector automatically cuts in to break the circuit and the button pops out, whenever heavy work i s prolonged. Wait 20-30 seconds before pressing the restart button to resume operation. Your finger should not be on the trigger when you press the restart button, however.

Restart button

I

9