Repair

P 2/ 14

CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.

[1] NECESSARY REPAIRING TOOLS

Code No.

Description

Use for

1R004

Retaining ring pliers ST-2 for External ring

removing/ assembling Retaining rings S-12 and S-24

1R127

Air density tester

diagnosing Carburetor

1R171

T-type hex. wrench 4-130

removing / assembling M5 Hex socket head bolt

1R247

Round bar for arbor 20-100

removing Clutch drum and Ball bearing 6001LLU

1R286

Round bar for arbor 12-50

press-fitting Clutch drum

1R308

Spring pin extractor 4.0

holding Cutter holder

1R364

Flywheel puller

removing Flywheel

1R366

Feeler gauge set

Adjusting Ignition coil, Spark plug and Rocker arm assembly

---

Hex socket bit 13

removing / assembling Flywheel

---

Wire brush

cleaning Spark plug

[2]GASKET

(1)Replace the removed gasket with the new one.

(2)Clean the matching surface where the gasket is placed to maintain its sealing performance.

[3]LUBRICANT / ADHESIVE APPLICATION

(1)Apply Makita grease N No.2 to Spiral spring in Recoil starter and the spline ends of Shaft.

(2)Apply Liquid gasket; ThreeBond 1215, to the matching surface of Crank case and Cylinder block when assembled. (Fig. 55)

[4]DISASSEMBLY/ASSEMBLY

[4]-1. Attention

Follow the instructions below during repairing.

•Wear glove to avoid injury.

•Cool down the engine enough before repairing to avoid skin burn.

•Remove the remaining fuel in Tank and Carburetor completely. Note; No open flames in the workshop.

•Repair the tool on the stable workbench and keep dust out.

•Record where and how the parts are assembled to avoid mis-assembling. And assort and keep the disassembled parts in the box by section.

•Treat the disassembled parts carefully. Be sure to clean and wash parts before assembling.

•Use Impact driver if bolts and screws can not be loosen.

•Tighten the bolts and the screws to the specific torque as listed in Fig. 59.

•Check the movement and sound of the main parts by manually turning each part once assembled.

•Check the assembled parts by manually turning them if there is any faulty or unusual gap.

Page 1 Page 3
Page 2
Image 2
Makita ER2650LH dimensions Necessary Repairing Tools
Page 1 Page 3

ER2650LH specifications

The Makita ER2650LH is a powerful and efficient brushcutter designed for professionals and homeowners alike. This cutting-edge gardening tool boasts a robust engine and advanced features, making it an excellent choice for tackling tough landscaping tasks.

One of the standout features of the ER2650LH is its 25.4cc 2-stroke engine, which delivers impressive power while maintaining fuel efficiency. This engine is designed to produce minimal emissions, adhering to environmental standards while providing substantial performance. The lightweight construction of the unit enhances maneuverability, allowing users to work for extended periods without fatigue.

The ergonomics of the Makita ER2650LH are thoughtfully designed, featuring a comfort grip handle that reduces vibration. This allows for better control and reduces hand fatigue during prolonged usage. The unit also comes equipped with a bicycle-type handle that improves stability and precision, making it easier to navigate around obstacles.

One of the notable technologies incorporated into the ER2650LH is the Easy Start system. This feature allows for smooth and effortless starting with minimal effort. The inclusion of a purge bulb ensures that fuel is readily available to the engine, making starting a breeze even in challenging conditions.

The cutting performance of the ER2650LH is enhanced by its specially designed cutting head. It is compatible with both nylon lines and blade attachments, offering versatility for various landscaping tasks. The unit is capable of handling thick grass, weeds, and light brush, making it suitable for residential gardens, parks, and commercial landscaping.

Makita also prioritizes user safety with the ER2650LH. The machine features an adjustable guard that helps protect operators from debris while providing clear visibility of the cutting area. Additionally, the unique design of the fuel tank allows for easy filling and monitoring of fuel levels, ensuring that users can work uninterrupted.

In summary, the Makita ER2650LH brushcutter is a technologically advanced tool that combines power, efficiency, and user comfort. Its lightweight design, innovative starting system, and versatility make it an ideal choice for anyone seeking a reliable gardening solution. Whether for professional use or personal projects, the ER2650LH stands out as a top-notch option for landscaping enthusiasts.
Top Page Image Contents