Repair
P 5/ 14
[4]DISASSEMBLY/ASSEMBLY
DISASSEMBLING
(2)Disaasemble Cutter shaft and Ball bearings from Head case complete. (Fig. 10)
Fig. 10
1.Make Hex wrench 5 square shape by grinding its two diagonal edges and insert it into the square hole of Cutter shaft.
Head case complete
2.Fix Head case with vise and lock Cutter holder with 1R308. Then, turn Wrench 5 counterclockwise and disassemble Cutter holder.
Head case complete | 1R308 |
Hex wrench 5
vise
Square hole of Cutter shaft
Grind these edges. | Hex wrench 5 | |
Hex wrench 5 | ||
|
3.Remove Cutter shaft with Arbor press. And then, remove Ball bearing 608DDW by using 1R286.
Arbor press
1R286
Head case complete
Ball bearing 608DDW
ASSEMBLING
(1) Take reverse step of the disassembly. (Fig. 10, 11)
Note: • Pay attention to the assembly direction of Washer and Bearing washer.
•Shaft end can be fitted into the square hole of Cutter shaft by twisting it with pliers to match their angles without disassembling Head case.
Fig. 11
Cutter holder | Washer | Head case | Ball bearing | Cutter shaft | Bearing washer |
608DDW |
Spring washer M8 |
|
| M5x25 | Collar | Ball bearing |
|
|
| Hex socket |
| 608ZZ |
|
|
| head bolt |
|
|
|
|
|
|
|
|
|
|
|
|
|
|