(d) Procedures for EW120R
1)Remove the oil gauge. Be cautious to place the oil gauge in a place where it will not gather dirt, dust or other foreign matter.
2)Place a cloth or paper towel to the area around the oil filler hole.
3)Remove the oil gauge, then tilt the engine and drain the oil into a pan or other receptacle.
4)Put the engine on a level surface, then fill with the oil up to the point of overflowing the filler neck. Pour the oil in from a squeeze bottle or other appropriate.
5)After filling the engine with oil, reinsert the oil gauge.
Ensure that the oil gauge is tight, as if it loosens later oil will leak out.
Oil gauge
Cloth or Paper towel
ENGLISH
FRANÇAISE
ESPAÑOL
