CLEANING AIR CLEANER
A dirty air cleaner element will cause starting difficulty, power loss, engine malfunctions, and shorten engine life extremely. Always keep the air cleaner element clean.
ENGLISH
EW120R
■Remove the fixing bolt of air cleaner cover.
■Pull out the lower edge of the cover to remove the air cleaner cover.
■Place the choke lever to the fully closed position, taking care to ensure that dust and dirt are not allowed to enter the carburetor.
■Remove the element, then clean it with a solution of warm water and a mild detergent, thoroughly drying it afterward. Install it in alignment with the lines as shown in illustration.
■Wipe off any oil adhering to the area around the air cleaner cover and breather with a cloth.
■After cleaning, reassemble the clean- er cover (insert the tab at the top first, then insert the bottom tab) and tighten the fixing bolt.
Place so that the | Choke lever |
cutout is here (top left) |
|
Element |
|
Breather
Air cleaner cover
Fixing bolt
Line (the slash mark)
Element (the dotted line)
FRANÇAISE
ESPAÑOL
