8) Remove the Thumbscrews on both sides of the Water Tank, and pull it out toward you. Clean and sanitize the Water Tank.
Water Tank
Thumbscrew
9)Pull the Discharge Tube from the Water Plate. Remove the Water Plate by pulling it toward you.
Water Plate
Discharge Tube |
10) Remove the Caps to clean and sanitize the |
Water Plate. If the Nozzles are clogged, clean |
them with a wire or a suitable brush. |
11) Refit the Caps on the Cleaning Outlets to seal |
them off. |
12) Slide in the Water Plate along the Mechanism |
Base. Refit the Discharge Tube securely on |
the Spray Outlet. A loose fitting may cause a |
water leak. |
Cap
Water Plate
Cap
Water Plate
Water Plate
Discharge Tube |
13) Place the rear of the Water Tank on the Water |
Tank Rest at the back of the Storage Bin. Use |
the Thumbscrews to secure the front of the |
Water Tank to the Mechanism Base. |
Mechanism Base
Bin Rear
| Tank Rest |
Thumbscrew | Water Tank |
|
14) Refit the Suction Tube on to the Water Tank Inlet. A loose fitting may cause a water leak.
Water Tank
Suction Tube
15