Hoshizaki AM-150BWF, AM-100BAE, AM-150BAF PREPARING THE ICEMAKER FOR LONG STORAGE more than 1 day

8.PREPARING THE ICEMAKER FOR LONG STORAGE (more than 1 day)

WARNING

Drain the icemaker to prevent damage to the water supply line at subfreezing temperatures, using air or carbon dioxide. Shut off the icemaker until proper air temperature is resumed.

[1] On water-cooled model only, first remove the water from the water-cooled condenser:

1)Remove the Front Panel (Lower).

2)Move the Control Switch, on the Control Box, to the “OFF” position.

3)Wait 3 minutes.

4)Move the Control Switch to the “ICE” position.

Icemaker	Potable Water
	Supply Line

Shut-off Valve

5)Allow 5 minutes for the icemaker to fill with water and the Water Pump to start operating.

6)Close the Water-cooled Condenser Water Supply Line Shut-off Valve.

Drain Valve

Air or CO2

Water-cooled Condenser	Shut-off Valve
Water Supply Line

7)Open the Drain Valve for the water-cooled condenser water supply line.

8)Allow the line to drain by gravity.

Drain Valve

Air or CO2

Fig. 5

9)Attach compressed air or carbon dioxide supply to the Condenser Water Line Drain Valve.

10)Blow the water-cooled condenser out using compressed air or carbon dioxide until water stops coming out.

[2]Remove the water from the potable water supply line and the Water Tank:

1)Close the Water Supply Line Shut-off Valve, and open the Drain Valve.

2)Remove the Front Panel (Lower), and move the Control Switch, on the Control Box, to the “OFF” position.

10