15) Hook each Separator on to the Mechanism | Separator |
Base, and pull it hard toward you until it locks in |
|
place with a click. Refit all the Separators in |
|
the same way. |
|
16) Refit the Slope in its correct position. |
|
17)Plug in the icemaker, and move the Control Switch on the Control Box to the “ICE” position to start the automatic icemaking process.
18)Refit the Front Panel (Lower) in its correct position.
2. MAINTENANCE
IMPORTANT
This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker.
1) Exterior
To keep the exterior clean, wipe occasionally with a clean and soft cloth. Use a damp cloth containing a neutral cleaner to wipe off all oil or dirt
2) Air Filter
A plastic mesh air filter removes dirt or dust from the air, and keeps the Condenser from getting clogged. As the filter gets clogged, the icemaker’s performance will be reduced. Check the filter at least twice a month. When clogged, use warm water and a neutral cleaner to wash the filter.
3) Condenser
Check the Condenser once a year, and clean if required by using a brush or vacuum cleaner. More frequent cleaning may be required depending on the location of the icemaker.
16
