Makita EW320TR Cleaning Fuel Filter, Cleaning Fuel Cup, Adjusting Idling Rpm Carburetor, - 19-

Models: EW120R EW220R EW320TR

1 41
Download 41 pages 55.94 Kb
Page 30
Image 30
CLEANING FUEL FILTER

CLEANING FUEL FILTER

(EW120R)

(a)Remove the hose clamp and pull out the fuel filter from fuel pipe.

(b)Wash the fuel filter with kerosene.

(c)After washing, reassemble it. If the fuel filter is heavy dirty, replace it with new one.

CLEANING FUEL CUP

(EW220R,EW320TR)

(a)Inspect fuel cup for water and dirt.

(b)To remove water and dirt, close the fuel cock and remove the fuel cup.

(c)After removing dirt and water, wash the fuel cup with kerosene or gasoline. Reinstall securely to prevent leakage.

Fuel pipe Fuel filter

Hose clamp

Fuel cup

ADJUSTING IDLING RPM (CARBURETOR)

(EW120R)

When adjust screw is turned right, engine rpm increases, and when it is turned left, rpm decreases.

Normal idling rpm 3000±100rpm

Adjust screw

Carburetor

NOTE:

The carburetor greatly affects the performance of the engine.

Since it has been adjusted carefully at our factory before shipment, avoid adjusting unless absolutely necessary.

If adjustments are needed, contact your nearest dealer.

19

Page 30
Image 30
Makita Cleaning Fuel Filter, Cleaning Fuel Cup, Adjusting Idling Rpm Carburetor, EW220R,EW320TR, - 19-, EW120R