Makita G1200R instruction manual Checking engine oil level, Checking fuel level

4.BEFORE OPERATION (NECESSARY INSPECTIONS/ CHECKS)

Checking engine oil level

0Remove oil gauge and check oil level :

-If level is low, fill to the top of the oil filler neck.

			-Change oil if badly contaminated. (See page 15 for
			procedure.)
			Use class SC (API classification) oil or a higher grade of
			oil.
3	Oil filler neck		SAE 1OW-30 or 1OW-40 is recommended for general,
			all-temperature use. If single viscosity oil is used, select
			the appropriate viscosity for the average temperature in
			your area.
			SAE 1OW-30 - For general, all temperature use
			SAE 5W	- For cold weather below -15 "C(5"F).
			Oil level checking and refilling should be performed
			on a level surface with the engine stopped.
I/	/ LEVELmarkI	I	Checking fuel level
			- If fuel level is low, place the engine switch to "STOP"
			position.

-Refill fuel tank up to the specified level indicated by the "LEVEL" mark in the fuel filler openings as shown.

Tank capacity	3.5 lit. (0.92 U.S.gal) (up to
	the specified level marked
	"LEVEL")
I Recommended fuel I Non-lead gasoline		I

+CAUTION1 . Take the proper precautions to prevent fire hazards when refilling.

2. Avoid overfilling.

3. Be sure to stop the engine before refilling.

- 7 -