5. OPERATING PROCEDURES
Starting
-Check oil and fuel levels.
-Make sure the appliance is disconnected.
-Turn engine switch to "CHOKE" position. (When engine is warm or temperature is high, start engine with the switch at "RUN" position.)
-Pull the starter handle slowly until passing the compression point (resistance will be felt), then return the handle to its original position and pull swiftly.
-After starting, allow the starter handle to return to its original position with the handle still in your hand.
NOTE : When engine fails to start after several attempts, repeat the starting procedures mentioned above with the engine switch placed at "RUN" position.
-After 20 to 30 seconds of warm-up is completed, turn the engine switch to "RUN" position.
