Work mode: hammer drilling into concrete

Vibration emission (ah, HD): 17.0 m/s2

Uncertainty (K): 1.5 m/s2

Model HR5212C

Work mode: chiseling function with side handle

Vibration emission (ah, CHeq): 7.0 m/s2

Uncertainty (K): 1.5 m/s2

Work mode: chiseling function with side grip

Vibration emission (ah, CHeq): 8.0 m/s2

Uncertainty (K): 1.5 m/s2

Work mode: hammer drilling into concrete

Vibration emission (ah, HD): 9.0 m/s2

Uncertainty (K): 1.5 m/s2

ENG901-1

The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.

The declared vibration emission value may also be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.

Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s): Designation of Machine:

Rotary Hammer

Model No./ Type: HR4003C, HR4013C, HR5202C,

HR5212C

Conforms to the following European Directives: 2006/42/EC

They are manufactured in accordance with the following Standard or standardized documents:

EN60745

The Technical file in accordance with 2006/42/EC is available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

22.10.2013

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

10

Page 10
Image 10
Makita HR5212C instruction manual EC Declaration of Conformity, For European countries only