ENGLISH (Original instructions)
Explanation of general view
1 | Switch trigger | 9 | Clamp nut | 18 | Screws |
2 | Switch button | 10 | Side grip | 19 | Guard cover |
3 | Adjusting dial | 11 | Bit shank | 20 | Connector |
4 | Change lever | 12 | Bit grease | 21 | Screw |
5 | Pointer | 13 | Bit | 22 | Crank cap cover |
6 | 14 | Release cover | 23 | Control plate | |
| (green) | 15 | Depth gauge | 24 | Crank cap |
7 | Service indicator lamp (red) | 16 | Lock button | 25 | Hammer grease |
8 | Side handle | 17 |
|
|
SPECIFICATIONS
| Model | HR4003C |
| HR4013C | HR5202C |
|
| HR5212C |
|
|
|
|
|
|
| ||
Capacities | 40 mm |
| 52 mm | |||||
|
|
|
|
|
|
|
| |
Core bit | 105 mm |
| 160 mm | |||||
|
| |||||||
|
|
|
|
|
|
|
|
|
No load speed | 250 | – 500 |
| 150 | – 310 | |||
Blows per minute | 1,450 | – 2,900 | 1,100 | – 2,250 | ||||
|
|
|
| |||||
Overall length | 479 mm |
| 599 mm | |||||
|
|
|
|
|
|
|
| |
Net weight | 6.2 kg |
| 6.8 kg | 10.9 kg |
|
| 11.9 kg | |
|
|
|
|
|
|
|
| |
Safety class |
|
|
| /II |
|
|
| |
|
|
|
|
|
|
|
|
|
•Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•Specifications may differ from country to country.
•Weight according to
Intended use
The tool is intended for hammer drilling in brick, concrete and stone as well as for chiselling work.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
ROTARY HAMMER SAFETY WARNINGS
1.Wear ear protectors. Exposure to noise can cause hearing loss.
2.Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
3.Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
4.Wear a hard hat (safety helmet), safety glasses and/or face shield. Ordinary eye or sun glasses are NOT safety glasses. It is also highly recommended that you wear a dust mask and thickly padded gloves.
5.Be sure the bit is secured in place before operation.
6.Under normal operation, the tool is designed to produce vibration. The screws can come loose easily, causing a breakdown or accident. Check tightness of screws carefully before operation.
7.In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. This will loosen up the lubrication. Without proper warm- up, hammering operation is difficult.
8.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
9.Hold the tool firmly with both hands.
10.Keep hands away from moving parts.
11.Do not leave the tool running. Operate the tool only when
6
