6.Rotate the chisel so that the chisel faces toward the direction suitable for your work. Then secure the chisel and chisel dapter to the tool using the clamp screw on the chisel adapter.
7. Set the action mode changing knob to "hammering only". Now you can use the chisel.
8.To remove the chisel, follow the installation procedures in reverse.
CAUTIO N:
Always use "hammering only" action when the chisel adapter is installed on the tool. If you use "rotation with hammering" or "rotation only", a malfunction and damage to the tool will result.
Blow-out bulb
Use the
Dust cup
Use the dust cup to prevent dust from fall- ing over the tool and on yourself when per- forming overhead drilling operations. Attach the dust cup to the bit as shown in the figure. The dust cup can be attached to the bit up to 14.5 m m (9/16") in diameter.
Drilling in wood or metal
Use the optional drill chuck assembly (con-
sisting of drill chuck and chuck adapter as- |
| Chuck adapter |
sembly). When installing it, refer t o |
|
|
"installing or removing drill bit" described on |
| a |
the previous page. Set the action mode |
| |
changing knob to "rotation only". You can |
|
|
drill up to 13 m m (1/2") diameter in metal |
|
|
and up to 18 m m (11/16") diameter in wood. | I |
|
| Drill chuck | |
|
|
13
