Side grip (auxiliary handle)
The side grip swings around to either side,
allowing easy handling of the tool in any ‘lamp Screw position. Loosen the side grip by turning it counterclockwise, swing it to the desired
position and then tighten it by turning clockwise.
Side grip
Installing or removing the drill bit
CAUTION:
Always be sure that the tool is switched off and the bit.
To install the bit, turn the change ring in the direction of the arrow until the I mark on the change ring is aligned with the I mark on the rubbedr cap. Align the key groove on the bit shank with the 1 mark on the rubber cap and insert the bit.
unplugged before installing or removing
Key groove I
\?
Rubber cap Change ring