CAUTION :
During a bevel cut, it may create a condition whereby the piece cut off will come to rest against the side of the blade. If the blade is raised while the blade is still rotating, this piece may be caught by the blade, causing fragments t o be scattered around which is dangerous. The blade should be raised ONLY after the blade has come to a complete stop.
When pressing down the handle, apply pressure in parallel with the blade. If a force i s applied perpendicularly to the turn base or if the pressure direction is changed during a cut, the precision of the cut will be impaired.
5.Compound cutting
Compound cutting i s the process in which a bevel angle is made a t the same time in which a miter angle i s being cut on a workpiece. Compound cutting can be performed a t angle shown in the table below.
Bevel angle
Left and right 45O
Left and right 35"
Left and right 0" - 30°
I
1
Miter angle Left and right 0' - 45'
Left and right Oo - 55' Left and right Oa - 60'
16
