+
6.Cutting crown and cove moldings
.Crown and cove moldings can be cut on a compound miter saw with the moldings laid f l a t on the turn base.
*There are two common types of crown moldings and one type of cove molding: 52/38" wall angle crown molding, 45" wall angle crown molding and 45" wall angle cove molding. See illustrations below.
CeiIIingCeilling
52/38" type | 45" type | 45" type |
crown molding | crown molding | cove molding |
.There are crown and cove molding joints which are made to frt "Inside" 90" corners ( @ and @ In Fig. A)and "Outside" 90" corners (0and @ in Fig A)
38" or 45"
-w
inside corner | Outside corner |
F i g . U
inside corner
I 7
