MAINTENANCE | OWNERS MANUAL |
OPERATING PROCEDURES ... Continued
When you are finished:
6)Set the pressure switch lever to “OFF”.
7)Using the air tool or accessory, bleed the tank pressure down to zero.
8)Remove the air tool or accessory.
9)Drain water from air tank by opening drain cock valve on bottom of tank.
WATER WILL CONDENSE IN THE AIR TANK. IF NOT DRAINED, WATER WILL CORRODE AND WEAKEN THE AIR TANK CAUSING A RISK OF AIR TANK RUPTURE.
Note:
If drain cock valve is plugged, release all air pressure. The valve can then be removed, cleaned, then reinstalled.
10)After the water has been drained, close the drain valve. The air compressor can now be stored.
MAINTENANCE
WARNING: UNIT CYCLES AUTOMATICALLY WHEN POWER IS ON. WHEN DOING MAINTENANCE,YOU MAY BE EXPOSED TO VOLTAGE SOURCES, COMPRESSED AIR OR MOVING PARTS. PERSONAL INJURIES CAN OCCUR. BEFORE PERFORMING ANY MAINTENANCE OR REPAIR, UNPLUG THE COM- PRESSOR AND BLEED OFF ALL AIR PRESSURE.
To ensure efficient operation and longer life of the air compressor unit, a routine maintenance schedule should be prepared and followed. The following routine maintenance schedule is geared to a unit in a normal working environment operating on a daily basis. If necessary, the schedule should be modified to suit the conditions under which your compressor is used. The modifications will depend upon the hours of operation and the working environment. Compressor units in an extremely dirty and/or hostile environment will require a greater frequency of all maintenance checks.
12 | MAKITA - MAC700 / MAC2400 / MAC5200 |
