Makita Model T220DW instruction manual Safety system, Trigger Safety lever

CAUTION :

0Your new battery cartridge is not charged. You will need to charge it before use.

0 Do not keep the button pressed in with tape, etc. or the circuit will not function pro- perly. Also, a malfunction of the charger may result possibly causing overheating, etc.

0 If you try to charge a cartridge from a just-operated tool, sometimes the charging light will not come on. If this occurs, l e t the cartridge cool off for a while. Then re-insert it and try to charge it once more.

0 When you charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it almost completely a couple of times.

0 If you wish to charge two battery cartridges, allow 15 minutes between chargings on the fast charger.

Safety system

Make sure all safety systems are in working order before operation. The tool must not operate if only the trigger is pulled or if only the safety lever is pressed against the wood. It must work only when both ac- tions are performed. Test for possible faulty operation with a tool unloaded and pointed well away from yourself or any bystanders.

Trigger

Safety lever

NOTE :

There i s a possibility that the tool may operate for an instant when only the trigger is pulled. This does not indicate a problem. If this occurs, point the tool well away from yourself or any bystanders. Release and pull the trigger again to make sure the safety systems are in working order.

8