REPLACING THE NYLON CORD
The nylon cord can be easily replaced without removing the nylon cutting head from the String trimmer. Always stop the engine before replacing the nylon cord.
1 . Loosen the knob in the direction of the arrow engraved on the knob. Remove the knob and the cover. Take out the spool.
2. Remove the remaining nylon cord from the spool.
| I A | ||
| ( 1 1 Knob ( 2 )Cover 13) Spool | 14) Housing (51E y e l e t | |
3. Bend a new nylon cord nearly in half so that there | & | 3 | |
is approx. | I7' = | ||
120 mm |
|
| |
the t w o ends. |
|
| |
| \ | 120 m m | |
