3
4
E
To guarantee a troublefree operation of the oil pump the oil guide groove (E/3) as well as the oil inlet bore in the guide bar (E/4) must be cleaned in regular intervals.
Switching on the motor
5
6
F
-Plug in the saw.
-When switching on the electric chain saw always hold it with both hands.
-Take the back handle with the right hand and the tubular handle with the left hand. Hold the handles tightly with your thumbs facing your fingers. The bar and chain must not be in contact with any object.
-First depress the locking button (F/5) and then the power switch (F/6). Then release the locking button (F/5).
-Attention: The chain starts running immediately. Keep the power switch depressed as long as the motor is to run.
CAUTION:
Never lock the power switch in the ON position.
Switching off the motor:
-Release the power switch (F/6).
Holding the chain saw
Use this grip thumb
below handle!
H
Always grip each handle with the thumb and fingers encircling the handle as shown in Fig. H.
7 |
G |
NOTE: |
When the chain brake is actuated the power supply to the motor will be cut off.
If the saw does not start when the ON/OFF switch (F/6) is actuated, it will be necessary to release the chain brake.
-Pull the hand guard (G/7) firmly in the direction of the arrow until you feel it catch.
11
