Makita UH200D (HU01*) 3x16 Tapping screw, Set plate 5pcs Housing set R, Pin 6 with a notch

P 3/ 8

Repair

[2]DISASSEMBLY/ASSEMBLY

[2]-1. Gear 12-31, Helical gear 47

DISASSEMBLING

(1)Remove Blade, Crank and Housing set (R) as illustrated in Fig. 2.

Fig. 2

1. With pressing Lock lever, turn Under cover complete		2. Remove Under cover complete.
to the unlocked position as drawn below.		Under cover
	Unlocked position	complete
Under cover
	Lock lever
complete
		Shear blade
		assembly

3. Loosen two M4 Countersunk
head screws, and then remove	4. Remove Crank complete and Dust guard.
Shear blade assembly.	Dust guard	Crank complete
M4 Countersunk head screw
Shear blade assembly

5. Remove Set plate with slotted screwdriver. 6. Separate Housing set (R) by unscrewing five 3x16 Tapping screws.

	3x16 Tapping screw
Set plate	(5pcs.)
	Housing set (R)

Housing set (L)

(2)After removing Housing set (R), Helical gear 47 and Gear 12-31 can be removed. (Fig. 3)

Fig. 3

1. Remove Helical gear 47 and Gear 12-31 from Housing set (L).

Gear 12-31

2.After removing Washer 6 and Pin 6 which functions as a shaft for the Helical gear 47, remove 2 pcs. of Pin 4 by pressing with Arbor press. Helical gear 47 can be replaced.

	Pin 6 (with a notch)	Arbor press
Helical gear 47	Washer 6
	Housing set (L)	Pin 4
	Helical gear 47
		(2pcs.)