Wiring diagram (cont.)
Fig. D-3
Wind Controller´s Lead wires (blue, white) one time around Line filter.
To Plus pole of DC Motor
Line filter
Controller To Minus pole
of DC Motor
Fig. D-5
P 8/ 8
Fig. D-4
Controller has to be put into Housing set (L).
Note: Bring the Lead wire (blue) connecting portion to the bottom side (Helical gear 47 side) and the wires connecting portions to the front side (protector side).
Front side
(Protector side)
DC Motor
Lead wire (blue)
Housing set (L)
Bottom side (Helical gear 47 side)
Connect Receptacles to the Switch with facing the wire connecting portion to the Housing set (L) side in order to put the Lead wires on the Housing set (L).
| from Controller |
from Plus pole | Housing set |
(L) side | |
of Terminal |
|
Switch |
|
Connect Receptacles to the Terminal with facing the wire connecting portion to Housing set (L) side.
Terminal
Housing set
(L) side
Fig. D-6
Adhesive
Fix Controller´s Lead wires (red, black) in this Lead wire holder.
LED circuit
Pass the Lead wires of LED circuit between the Ribs.
Switch
In case Line filter has to be used, put Line filter into the space designated with gray color.
Controller
Terminal
DC motor
Fix all of the Lead wires of Controller in this Lead wire holder.
Controller