Makita VC4710
6.2.4 Replacing the filter bag
A | A |
C |
B |
1.Be sure that the vacuum is switched off and unplugged.
2.Open the retaining clamps
(A)and remove the upper section of the vacuum clean- er.
Removing the filter bag:
3.Carefully remove the filter bag connection from the inlet fitting (B).
4.Close the filter bag connec- tion (C) with the slider.
5.Dispose of the filter bag in accordance with applicable regulations.
Inserting the filter bag:
6.Clean the tank.
7.Insert the filter bag in the tank.
8.Press the cardboard collar of the new filter bag firmly on to the inlet fitting (B).
A | A |
9.Attach the upper section of the vacuum.
10.Close the retaining clamps
(A). Ensure that the retaining clamps fit properly.
20 | Original Instruction |
