6.2.2Wet suction
6.2.3Emptying the tank after wet suction
After emptying the tank: clean the rim of the tank and the seals in the intermediate ring and the upper sec- tion of vacuum before refitting them. If the seal or groove is dirty or dam- aged, the suction performance will be reduced.
0 |
auto |
Makita VC4710
1.Be sure that the vacuum is switched off and unplugged.
Before reinserting the suction hose: clean the inlet fitting and hose col- lar.
A | A |
2.Open the retaining clamps (A) and remove the upper sec- tion of the vacuum cleaner.
3.The material collected must be disposed of in accor- dance with the applicable regulations.
A | A |
4.Attach the upper section of the vacuum.
5.Close the retaining clamps
(A). Ensure that the retaining clamps fit properly.
Original Instruction | 19 |
