4.Select "Spare Drives." Press Enter.
5.Select "RAID size." Press Enter.
6.Press Y to save your settings.
Deleting RAID Sets
1.As the BIOS boots, press CTRL+S or F4 to enter the RAID BIOS utility.
2.Select "Delete RAID set." Press Enter.
3.Answer "Y" to remove the RAID set. If the RAID set being deleted is a Striped set, then all of the data will be lost. If the set being deleted is a Mirrored set, then the data will remain intact and accessible on both drives.
Rebuilding Mirrored Sets (RAID 1)
1.After replacing the failed hard drives, boot the BIOS, then press CTRL+S or F4 to enter the RAID BIOS utility.
2.Select "Rebuild RAID 1 set." Press Enter.
3.Select "Rebuild Hard Drive." Press Enter.
4.Answer "Y" to rebuild the Mirrored set of the hard drive.
9
