BIOS INSTALLATION (RAID SETTING)
Creating and deleting RAID sets is a function found in the BIOS (basic integrated operating system). During boot up, the RAID setting message will appear and pause for a few moments to allow you to choose what to do. This board will act as a normal
Creating Striped Sets (RAID 0)
1.As the BIOS boots, press CTRL+S or F4 to enter the RAID BIOS utility.
2.Select "Create RAID set." Press Enter.
3.Select "RAID 0," then press Enter.
4.Select "Number of hard drive." Press Enter.
5.Select "RAID size." Press Enter.
6.Press Y to save your settings.
7.Press CTRL+E and then press Y to exit the setup.
8.Continue with conventional Fdisk and Format steps as if you were installing a conventional hard drive.
9.Your RAID configuration is complete. Proceed to Software Installation.
6
