5.With the Complete screen displayed, click “Finish” to exit the driver wizard. Plug the converter into an available USB 2.0 port of your PC or notebook computer.
6.If installing a single converter, select “Yes, I want to restart my computer now” and click “Finish” to complete the driver installation. NOTE: If installing more than one converter, proceed to Step 7. After rebooting the computer, the extended display will be shown on the second display device.
7.If installing more than one converter, select “No, I will restart my computer later” and click “Finish” to continue with the installation of the second converter. Connect the next display device to the additional converter’s DVI connector and switch it on. Plug this additional converter into another
USB 2.0 port on the computer; the driver will again proceed to install automatically. Continue connecting up to six display devices and converters as instructed above; or select “Yes, I want to restart my computer now” (as shown in Step 6) and click “Finish.” After each reboot, the extended display will be shown on the display device.
INSTALLATION: WINDOWS 2000/XP
