4.A Windows Security screen may appear, but will not affect the driver installation or converter operation. Select “Always trust software...” and click “Install” to continue.
5.Allow the program to proceed while this status screen displays...
6.Connect the external display device (monitor/projector) to the DVI connector of the converter and switch it on.
7.When the InstallShield Wizard Complete screen displays, click “Finish” to exit. Plug the converter into an available USB 2.0 port on the computer.
8.If installing a single converter, select “Yes, I want to restart my computer now” and click “Finish” to complete the driver installation. NOTE: If installing more than one converter, proceed to Step 9. After rebooting the computer, the extended display will be shown on the second display device.
9.If installing more than one converter, select “No, I will restart my computer later” and click “Finish” to continue with the installation of the second converter. Connect the next display device to the
10 | INSTALLATION: WINDOWS VISTA |
|