INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

Pliers (that open to

Flashlight (optional)

39.5 mm [1 9/16"])

 

Tools needed for installation

Open end wrenches

Level

 

1/2" and 9/16"

Wood block

 

Torx®† T-20 Security

Ruler or measuring tape

 

screwdriver

 

 

 

¼" nut driver

Parts supplied

A B C D

E

A.U-shaped hose form

B.Water inlet hoses (2)

C.Inlet hose washers (4)

D.Transit bolt hole plug (4)

E.Beaded tie strap

Parts supplied for PD Models:

Service door lock cam

Foam pads

Parts supplied for PD Models:

Coin sensor white

Coin sensor black

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the items listed here contact your authorized Maytag distributor.

If You Have

You Will Need to Buy

Laundry tub or

Sump pump system (if not already

standpipe taller

available)

than 2.4 m (96")

 

 

 

® TORX is a registered trademark of Acument Intellectual Properties, LLC.

If You Have

You Will Need to Buy

Overhead sewer

Standard 76 L (20 gal. ), 762 mm (30") tall

 

drain tub or utility sink and sump pump

 

(available from local plumbing suppliers)

 

 

Floor drain

Siphon break, Part Number 285834;

 

additional drain hose,

 

Part Number 8318155; and connector

 

kit, Part Number 285835

 

 

Drain hose

1.2 m (4 ft.) drain hose extension kit,

too short

Part Number 285863

 

 

Water taps beyond

2 longer water fill hoses:

reach of fill hoses

1.8 m (6 ft.) Part Number 76314

 

3.0 m (10 ft.) Part Number 350008

Options

Pedestal

You have the option of purchasing pedestals separately for this washer. The pedestal will add to the total height of the washer.

Optional pedestal

Pedestal

Approximate

Color

Model

Height

height

 

Number

 

with washer

 

 

 

 

 

 

(73 mm) 27/8"

(1207 mm) 47.5"

White

WHP0400VW

Location Requirements

Selecting the proper location for your washer improves performance and minimizes noise and possible washer “walk.”

Your washer can be installed under a custom counter, or in a basement, laundry room, or recessed area. See “Drain System.”

Companion appliance location requirements should also be considered. Proper installation is your responsibility.

You will need

A water heater set to deliver 60°C (140°F) water to the washer.

An earthed electrical outlet located within 1.8 m (6 ft.) of where the power cord is attached to the back of the washer. See “Electrical Requirements.”

Hot and cold water taps located within 1.2 m (4 ft.)

of the hot and cold water fill valves, and water pressure of 137.9-689.6 kPa (20-100 psi).

A level floor with a maximum slope of 25 mm (1") under entire washer. Installing the washer on soft floor surfaces, such as carpets or surfaces with foam backing, is not recommended.

4

Page 4
Image 4
Maytag MAH22PDAGW0, MAH22PNAGW0 Installation Requirements, Tools and Parts, Options, Location Requirements

MAH22PDAGW0, MAH22PNAGW0 specifications

The Maytag MAH22PNAGW0 and MAH22PDAGW0 are high-efficiency front-loading washing machines that offer robust features and cutting-edge technologies designed to enhance your laundry experience. Known for their durability and performance, these models from Maytag are engineered to tackle tough stains and provide optimal cleaning results.

One of the standout features of both models is the PowerWash cycle, which utilizes a combination of extra agitation and a thorough rinse to effectively eliminate stubborn stains and deeply embedded dirt. This cycle ensures that your laundry comes out looking fresh and clean, even with heavily soiled items. Another key feature is the Heavy Duty cycle, which is specifically designed for washing bulky items and heavy fabrics, such as towels and bedding. This cycle provides the necessary cleaning power while being gentle on garments.

Both models also cater to user convenience through their advanced control panel featuring an intuitive interface. Users can easily select from various cycles, including Normal, Delicate, and Eco, allowing for flexibility based on laundry needs. The machines also feature a time-saving Quick Wash cycle, which delivers clean clothes in less time, making it ideal for busy households.

In terms of energy efficiency, the MAH22PNAGW0 and MAH22PDAGW0 are Energy Star certified, meaning they consume less water and electricity compared to traditional models. This efficiency not only leads to lower utility bills but also promotes a more sustainable lifestyle.

A notable characteristic of both washers is their stainless steel wash basket, which resists chipping and snagging, providing a gentle yet effective cleaning environment. The machines also come equipped with Maytag’s Direct Drive motor, which minimizes vibrations and noise, ensuring a quieter operation even during the spin cycle.

Additionally, the models offer a combination of a rear-drain pump and vented design, which helps to improve drainage and reduce the risk of mold and mildew buildup.

Overall, Maytag continues to uphold its reputation for reliability and quality with the MAH22PNAGW0 and MAH22PDAGW0, making these washing machines a great choice for any household looking for efficiency, power, and convenience in their laundry routine.