■A sturdy and solid floor to support the washer with a total weight (water and load) of 180 kg (400 lbs).

Do not operate your washer in temperatures below 0°C (32°F). Some water can remain in the washer and can cause damage in low temperatures.

Installation clearances

■The location must be large enough to allow the washer door to be fully opened.

■Additional spacing should be considered for ease of installation and servicing. The door opens more than 90° and it is not reversible.

■Additional clearances might be required for wall, door, and floor moldings.

■Additional spacing of 25 mm (1") on all sides of the washer is recommended to reduce noise transfer.

■Companion appliance spacing should also be considered.

■When installed, the mains plug should be accessible for washer disconnection from the mains supply.

Washer Dimensions

1282 mm

686 mm

(27")

(501/2")

1134 mm

(445/8")

732 mm

(2813/16")

Door is not reversible.

A floor drain should be provided under the bulkhead. Prefabricated bulkheads with electrical outlets, water inlet lines, and drain facilities should be used only where local codes permit.

Drain System

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. See “Tools and Parts.”

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of 50 mm (2"). The minimum carry-away capacity can be no less than 64 L (17 gal.) per minute.

The top of the standpipe must be at least 762 mm (30") high and no higher than 2.4 m (96") from the bottom of the washer.

762 mm (30" min.)

AB

Laundry tub drain system (view C)

The laundry tub needs a minimum 76 L (20 gal.) capacity. The top of the laundry tub must be at least 762 mm (30") above the floor.

Floor drain system (view D)

The floor drain system requires a siphon break that may be purchased separately. See “Tools and Parts.”

The siphon break must be a minimum of 710 mm (28") from the bottom of the washer. Additional hoses might be needed.

 

710 mm

762 mm

(28" min.)

(30" min.)

 

 

 

 

 

 

 

 

 

 

 

CD

5

Page 4 Page 6
Page 5
Image 5
Maytag MAH22PNAGW0, MAH22PDAGW0 installation instructions Drain System
Page 4 Page 6

MAH22PDAGW0, MAH22PNAGW0 specifications

The Maytag MAH22PNAGW0 and MAH22PDAGW0 are high-efficiency front-loading washing machines that offer robust features and cutting-edge technologies designed to enhance your laundry experience. Known for their durability and performance, these models from Maytag are engineered to tackle tough stains and provide optimal cleaning results.

One of the standout features of both models is the PowerWash cycle, which utilizes a combination of extra agitation and a thorough rinse to effectively eliminate stubborn stains and deeply embedded dirt. This cycle ensures that your laundry comes out looking fresh and clean, even with heavily soiled items. Another key feature is the Heavy Duty cycle, which is specifically designed for washing bulky items and heavy fabrics, such as towels and bedding. This cycle provides the necessary cleaning power while being gentle on garments.

Both models also cater to user convenience through their advanced control panel featuring an intuitive interface. Users can easily select from various cycles, including Normal, Delicate, and Eco, allowing for flexibility based on laundry needs. The machines also feature a time-saving Quick Wash cycle, which delivers clean clothes in less time, making it ideal for busy households.

In terms of energy efficiency, the MAH22PNAGW0 and MAH22PDAGW0 are Energy Star certified, meaning they consume less water and electricity compared to traditional models. This efficiency not only leads to lower utility bills but also promotes a more sustainable lifestyle.

A notable characteristic of both washers is their stainless steel wash basket, which resists chipping and snagging, providing a gentle yet effective cleaning environment. The machines also come equipped with Maytag’s Direct Drive motor, which minimizes vibrations and noise, ensuring a quieter operation even during the spin cycle.

Additionally, the models offer a combination of a rear-drain pump and vented design, which helps to improve drainage and reduce the risk of mold and mildew buildup.

Overall, Maytag continues to uphold its reputation for reliability and quality with the MAH22PNAGW0 and MAH22PDAGW0, making these washing machines a great choice for any household looking for efficiency, power, and convenience in their laundry routine.
Top Page Image Contents