Pricing

After the door is opened following the completion of a cycle, the display indicates the cycle price (unless set for free operation). As coins are dropped or debit inputs arrive, the display will change to lead the user through the initiation of a cycle.

Free Cycles

This is established by setting the cycle price to zero. When this happens, “SELECT CYCLE” will appear rather than a cycle price.

Display

After the washer has been installed and plugged in, the display will show “0 MINUTES.” Once the washer has been plugged in and the washer door opened and closed, the display will show the price. In washers set for free cycles, the display will flash “SELECT CYCLE.”

NOTE: Not displayed on washer as shown. Message scrolls followed by the failure code.

Control Set-up Procedures

IMPORTANT: Read all instructions before operating.

■PD Models: Insert access door key, turn, and lift to remove access door.

■PN Models: Remove connector AA1 on the circuit board.

Set-up procedures can be entered by using the Service Access Code for PN washers without a key switch installed.

IMPORTANT: Unplug washer or disconnect power before opening the console. To access connector AA1:

Unplug washer or disconnect power.

Open console, disconnect plug on AA1, close console.

Plug in washer or reconnect power.

The washer is now in the set-up mode. The lower fabric setting key pads and the digital display are used to set up the controls. The display can contain 4 numbers and/or letters and a decimal point. These are used to indicate the set-up codes and related code values available for use in programming the washer.

Once the washer has been programmed with a hand held device using Accu Trac, or a Gen. 2 card reader has been installed, the washer will be put into dAS mode permanently, and dAS will be displayed every time set-up mode is accessed.

How to use the key pads to program controls

1.The PERMANENT PRESS key pad is used to adjust the values associated with set-up codes. Pressing this key pad will change the value by increments. Rapid adjustment

is possible by holding the key pad down.

2.The WOOLENS key pad advances you through the set-up codes. Pressing this key pad will advance you to the next available set-up code. Holding the key pad down will automatically advance through the set-up codes at a rate of 1 per second.

3.The DELICATES & KNITS key pad is used to select or deselect options.

Start Operating Set-up

NOTE: Prior operation, a payment system or an OPL kit must be installed.

Before proceeding, it is worth noting that, despite all of the options available, an owner can simply choose to un-crate a new commercial washer, hook it up, plug it in, and have a washer that operates. Washers are preset at the factory for a 14-minute wash period and 3 rinses (no extra rinse).

Set-up Codes

■The WOOLENS key pad will advance you from code to code.

■The PERMANENT PRESS key pad will change the code value.

■The DELICATES & KNITS key pad will select or deselect options.

FOR PN MODELS: The set-up codes are the same as for the “PD” model except where noted.

The set-up code is indicated by the one or two left-hand characters. The set-up code value is indicated by the two or three right-hand characters.

CODE EXPLANATION

6 07 REGULAR CYCLE PRICE (Factory Default)

6 07 Represents the number of coins (Coin 1) needed to start the washer; may adjust from 0-39. (See VALUE OF COIN 1.) Advance from 0-39 by pressing PERMANENT PRESS key pad. Factory default of 7 x coin 1.

6 00 PN MODELS ONLY: Factory default for 0 coins.

With coin slide activation, this represents the number of push-in actuations of a coin slide to start the washer.

6 01 setting would represent one coin slide actuation.

NOTE: For coin slide activation, replacement of the meter case is necessary.

Press the WOOLENS key pad once to advance to next code.

7 14 WASH LENGTH

7 14 This is the number of minutes for WASH. Washer comes from the factory preset with 14 minutes. Choose from 9-17 minutes by pressing the PERMANENT PRESS key pad.

Press the WOOLENS key pad once to advance to next code.

10

Page 9 Page 11
Page 10
Image 10
Maytag MAH22PDAGW0, MAH22PNAGW0 Control Set-up Procedures, Set-up Codes, How to use the key pads to program controls
Page 9 Page 11

MAH22PDAGW0, MAH22PNAGW0 specifications

The Maytag MAH22PNAGW0 and MAH22PDAGW0 are high-efficiency front-loading washing machines that offer robust features and cutting-edge technologies designed to enhance your laundry experience. Known for their durability and performance, these models from Maytag are engineered to tackle tough stains and provide optimal cleaning results.

One of the standout features of both models is the PowerWash cycle, which utilizes a combination of extra agitation and a thorough rinse to effectively eliminate stubborn stains and deeply embedded dirt. This cycle ensures that your laundry comes out looking fresh and clean, even with heavily soiled items. Another key feature is the Heavy Duty cycle, which is specifically designed for washing bulky items and heavy fabrics, such as towels and bedding. This cycle provides the necessary cleaning power while being gentle on garments.

Both models also cater to user convenience through their advanced control panel featuring an intuitive interface. Users can easily select from various cycles, including Normal, Delicate, and Eco, allowing for flexibility based on laundry needs. The machines also feature a time-saving Quick Wash cycle, which delivers clean clothes in less time, making it ideal for busy households.

In terms of energy efficiency, the MAH22PNAGW0 and MAH22PDAGW0 are Energy Star certified, meaning they consume less water and electricity compared to traditional models. This efficiency not only leads to lower utility bills but also promotes a more sustainable lifestyle.

A notable characteristic of both washers is their stainless steel wash basket, which resists chipping and snagging, providing a gentle yet effective cleaning environment. The machines also come equipped with Maytag’s Direct Drive motor, which minimizes vibrations and noise, ensuring a quieter operation even during the spin cycle.

Additionally, the models offer a combination of a rear-drain pump and vented design, which helps to improve drainage and reduce the risk of mold and mildew buildup.

Overall, Maytag continues to uphold its reputation for reliability and quality with the MAH22PNAGW0 and MAH22PDAGW0, making these washing machines a great choice for any household looking for efficiency, power, and convenience in their laundry routine.
Top Page Image Contents