Manhattan Computer Products DSM-4S instruction manual Connections, Lnb

CONNECTIONS

Your DSM-4S is ready to use straight out of the box. How to connect your meter is illustrated below. Note: Always make all of your connections prior to switching your DSM-4S on.

LNB

Manhattan

LNB IN

For the easiest method of connection disconnect the cable from the LNB on your dish and connect this to the Set Top Box (receiver symbol) connector on your DSM-S4. Then use the short F cable supplied with your DSM-S4 to connect your LNB (dish symbol) connector to the LNB as shown above.

After your connections have been completed ensure that your set top box is switched on with any channel selected. Tip: Ensure that the F connectors are hand tight and not loose (good connections are essential).

Page 4