Manhattan Computer Products DSM-4S instruction manual Downloads, Click Transfer

DOWNLOADS

To update or load your selected satellite file to your DSM-4S meter connect your meter via USB to your PC.

The USB port is located on the lower right side of the casing.

Program mode

On connecting the DSM-4S to your PC the LCD will flash a few times and settle into program mode after a few seconds (as shown in the diagram on the right).

Double click the target style icon to open the loading program and follow the steps below.

Click Transfer

While the data transfer is taking place the LCD text will indicate that the NanoSat is “busy” receiving data.

On completion the LCD text will indicate “done”

Manhattan

Program mode: busy

Program mode: done

Click “OK” and disconnect the DSM-4S from your PC your meter is now ready for use with the selection you downloaded.

Page 9