SOFTWARE UPDATES
From time to time it may be necessary to update the satellite selections on your DSM-4S satellite meter or you may wish to download an alternative satellite pack from the Manhattan web site. Before proceeding to download new or updated settings please insure that the USB drivers are correctly installed, this is usually an automatic process (as described below) but the drivers can also be manually downloaded and installed if required. For the automatic driver installation to take place your PC must be connected to the internet.
Connect your DSM-4S to your PC with the USB interface lead supplied. The Found new hardware balloon will pop-up in the lower left of your windows task bar.
Found New Hardware
DSM-S4
In the Found New Hardware Wizard select “Yes, this time only” and click on the “Next >” button.
Next select “Install the software automatically” and click on the “Next >” button.
While your PC is searching for and downloading the required drivers the installation wizard window will look like this. This operation may take a few seconds to complete.
Continued...
