General safety rules

1.Remove branches in sections. Maintain safe operating positions, to avoid risk of being struck by falling branches or by those that rebound after hitting the ground

2.Cover saw chain with guard during transport and storage.

3.Do not hit rocks, stones, tree stumps, and other foreign objects with the working unit. If saw chain strikes an obstruction, stop engine immediately, unplug unit and inspect saw chain for damage.

4.Do not operate with a dull, fractured or damaged saw chain.

WARNING

WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS, INCLUDING THE FOLLOWING, SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY.

Pay particular attention to all sections regarding safety.

Read and understand all these instructions before operating this product and save these instructions. Be familiar with the controls and the proper use of equipment.

For safe operations:

1.Keep work area clean.

Cluttered areas and benches invite injuries.

2.Consider work area environment.

Do not expose power tools to rain. Do not use power tools in damp or wet locations. Keep work area well lit. Do not use power tools where there is risk of fire or explosion.

3.Guard against electric shock.

Avoid body contact with earthed or grounded surfaces, e.g. pipes, radiators, stoves, ovens, refrigerators.

4.Keep children away.

Do not let visitors touch the tool or extension cord. All visitors should be kept away from area. Local regulations may restrict the age of the operator.

5.Store idle tools.

When not in use, tools should be stored in a dry, high or locked up place, out of reach of children.

6.Do not force the tool.

It will do the job better and safer at the rate for which it was intended. Walk, never run.

7.Use the right tool.

Do not force small tools or attachments to do the job of a heavy duty tool. Do not use tools for purposes not

3

intended; for example, do not use chain saw attachment to cut tree limbs or logs.

8.Dress properly.

Do not wear loose clothing or jewellery that can be caught in moving parts. Long trousers, non-slip gloves and sturdy work shoes with non-skid soles are recommended when working outdoors. Wear protective hair covering to contain long hair.

9.Use protective equipment.

To avoid injury, wear ear, eye protection, face or dust mask if the operation is dusty. To avoid injury from falling branches, wear helmet. Eye protection must meet applicable CE requirements.

10.Do not abuse the cord.

Never carry the tool by the cord or yank it to disconnect it from the socket. Keep the cord away from heat, oil and sharp edges.

11.Maintain tool with care.

Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and changing accessories. Inspect tool cord periodically and if damaged, have it repaired by an authorised service facility. Inspect extension cords periodically and replace, if damaged. Keep handles dry, clean and free from oil and grease.

12.Disconnect tools.

When not in use, before servicing and when changing accessories such as blades, bits and cutters.

13.Remove adjusting keys and spanners.

Form the habit of checking to see that keys and adjusting spanners are removed from the tool before turning it on.

14.Avoid unintentional starting.

Do not carry a plugged in tool with a finger on the switch trigger. Ensure switch is off when plugging in.

15.Use outdoor extension leads.

When tool is used outdoors, use only extension cords intended for outdoor use.

16.Important extension cord information:

a.Make sure the extension cords are in good condition before use.

b.Based on the total length of cord that you are going

to use, check the chart to make sure the cord meets the correct minimum cord gauge (AWG) requirements.

IMPORTANT NOTE:

Using an undersized cord or a larger number cord gauge (AWG) than recommended in the chart, will cause a loss in power and overheating of the unit. Using a smaller number cord gauge (AWG) than recommended in the chart, is acceptable.

Page 3 Page 5
Page 4
Image 4
Mantis Pruner E System owner manual General safety rules, For safe operations
Page 3 Page 5

Pruner E System specifications

The Mantis Pruner E System is an innovative gardening solution that redefines the way we maintain our gardens and landscapes. Designed for both amateur gardeners and professional landscapers, this advanced pruning system combines ergonomic design with cutting-edge technology to provide exceptional efficiency and ease of use.

One of the main features of the Mantis Pruner E System is its electric motor. This system operates quietly and efficiently, reducing the fatigue often associated with traditional manual pruning tools. The electric motor ensures precise cutting, allowing users to tackle even the most complicated pruning tasks without straining their hands or wrists. The lightweight design further enhances usability, enabling hours of comfortable operation.

The E System also incorporates a unique blade technology. Built from high-quality, hardened steel, these blades are engineered for durability and sharpness. They are designed to handle branches of varying thickness, making the pruner versatile across a range of gardening applications. The easy blade replacement mechanism ensures that users can maintain their tool without hassle, providing convenience and long-term performance.

Safety is a paramount consideration in the design of the Mantis Pruner E System. It features an automatic shut-off function that activates whenever the pruner is not in use, reducing the risk of accidental injuries. Additionally, the pruner is equipped with a safety grip that prevents slippage during operation, giving users confidence while they work.

Battery life is another critical aspect of this system. The Mantis Pruner E System is equipped with a long-lasting lithium-ion battery that provides extended runtime. This allows for long gardening sessions without interruptions for recharging. The battery can be conveniently charged using a standard outlet, further enhancing the tool's usability.

In terms of technological integration, the Mantis Pruner E System includes an intuitive control panel that displays battery status and operational readiness. Users can easily monitor their tool’s performance, ensuring they are always ready for the task at hand.

Overall, the Mantis Pruner E System stands out for its blend of power, efficiency, safety, and user-centric design. Its thoughtful features cater to the needs of modern gardeners, ensuring a seamless pruning experience that saves time and energy while delivering exceptional results. Whether trimming hedges or shaping shrubs, the Mantis Pruner E System proves to be an indispensable tool in any gardening arsenal.
Top Page Image Contents