Marantz CDR631 manual Digital Spdif connections, Digital Optical connections

ENGLISH

INSTALLATION

Digital SPDIF connections

1For recording and playing, connect coaxial cables from the CD-Recorder to digital equipment based on the dia- gram below:

DIGITAL
	LOOP
	OUT
6	7
IN	OUT

Digital cascade connections

Cascade recording allows, via the LOOP OUT jack, multiple units to record all using the exact same digital signal. The LOOP OUT can also be used to pass a digital signal to other equipment without being processed by the CDR631.

Use the following steps to setup multiple CDR631s for record- ing from a single digital source:

1Connect the coaxial digital output of a digital source machine (CD, DAT, etc.) to the DIGITAL IN jack on the CDR631 as indiacted in step 9.

DIGITTAL DIGITTAL

I N P U T O U T P U TI N P U T O U T P U T

Mixer/Pre-Amp,		Mixer/Pre-Amp,
	DAT, CD/R,etc.		DAT, CD/R,etc.

2 Set AES/EBU-SPDIFswitch (34) to SPDIF.

LOOP

OUT

IN

AES/EBU

SPDIF IN OUT

(SPDIF)

Note:

You can also connect the LOOP OUT socket on this CD-Re- corder to the input sockets of a digital device when DIGITAL (SPDIF) IN is used.

Digital Optical connections

1For recording, connect a fiber-optic cable to the CD-Re- corder with a digital equipment based on the diagram below.

DIGITAL

IN

8

O U T P U T

Mixer/Pre-Amp,

DAT, CD/R,etc.

Note:

Before Connecting the cables, remove the dust caps from the digital optical connections. We recommend that you save the caps.

2Connect the LOOP OUT of the first CDR631 to the DIG- ITAL IN on the next CDR631 as indiacted in step 0.

3Continue to conect units as indicated in step 0 and !.

DIGITTAL

CD, DAT, etc.

I N P U T	O U T P U T	9
DIGITTAL
	LOOP
	OUT
IN	OUT	0
DIGITTAL
	LOOP
	OUT
IN	OUT	!
DIGITTAL
	LOOP
	OUT
IN	OUT

5 CDR631s max.

6

CDR631(U)_Eng_P01-11.p65 6 8/4/00, 9:29 AM