Marantz CDR631 manual Auto track increment, Auto stop

ENGLISH

MENU MODE

The numbers between parentheses refer to the fold-out.

Auto track increment

1Stay in the stop mode. (No Operation)

2Press STORE/MENU (20, 77) on the deck or the remote control to enter Menu mode.

3Rotate REC LEVEL/SELECT (19) or press S (15, 74), T (16, 82) to select the AUTO TRACK submenu.

appears on the display.

4Press REC LEVEL/SELECT (19) or ENTER (78) to confirm.

5 Select Auto track or by rotating REC LEVEL/ SELECT (19) or press S (15, 74), T (16, 82).

6Press REC LEVEL/SELECT (19) or ENTER (78) to confirm.

•	When	is selected, track numbers will be automati-
	cally incremented during recording.
•	When	is selected, you can mark the recorded tracks
	yourself by press TR.INCR. (25) or TRACK INCR (67).

7Press STORE/MENU (20, 77) to store settings and re- turn to the submenu or 9 (13) to exit.

Notes:

-The Auto Track menu item is also available during recording and in the record-standby mode.

-The Auto Track setting determines if the Auto Stop menu item is available. If Auto Track is OFF, Auto Stop is automati- cally OFF and the Auto Stop menu item is not displayed in the menu. If Auto Track is ON, the Auto Stop menu item is available and Auto Stop can be switched ON or OFF. See this page for information regarding the Auto Stop menu item.

AUTO STOP	ON
Source
CD/MD	Stop after 3 seconds of user DATA of stop
(with user data)	pattern detected on the incoming source signal
DAT/DCC	Stop after 20 seconds of silence
(with user data)
Unknown	Stop after 20 seconds of silence
(no user data available)
Analog	Stop after 20 seconds of silence
No source	Stop after 3 seconds of unlock
(no lock)

The benefit of turning Auto Stop OFF is, for example, when you are recording sources such as classical music, which could have long passages of low level sound. If Auto Stop is ON in such a case, the CDR631 may automatically stop when it is not supposed to.

1Stay in the stop mode.(No operation)

2Press STORE/MENU (20, 77) on the deck or the remote control to enter Menu mode.

3Rotate REC LEVEL/SELECT (19) or press S (15, 74), T (16, 82) to select the AUTO STOP submenus.

appears on the display.

4Press REC LEVEL/MENU (19) or ENTER (78) to confirm.

5 Select Auto stop or by rotating REC LEVEL/ SELECT (19) or press S (15, 74), T (16, 82).

AUTO STOP ON : fully automatic stop.

AUTO STOP OFF : only manual stop during the recording.

Auto stop

If the Auto Track function is ON, the Auto Track menu item will become available. The Auto Stop function can then be turned ON or OFF depending on the recording requirements.

Note:

Auto Stop is automatically turned OFF and the menu item will not be displayed when Auto Track is OFF.

If Auto Stop is ON, the chart below indicates what amount of silence (-55dB or lower) is required for each source to trigger the CDR631 to stop recording. If Auto Stop is OFF, the CDR631 will record until stopped by the STOP (13, 81) button or the end of the disc is reached.

6Press REC LEVEL/SELECT (19) or ENTER (78) on the remote control to confirm.

7Press STORE/MENU (20, 77) to store setting and return to the submenu, or press 9 (13, 81) to exit.

Note:

-The Auto Track menu item is also available during the Record-Pause and Record modes.

-The Auto Track setting determines if the Auto Stop menu item is available. If Auto Track is OFF, Auto Stop is auto- matically OFF and the Auto Stop menu item is not displayed in the menu. If Auto Track is ON, the Auto Stop menu item is available and Auto Stop can be switched ON or OFF. See page 20 for information regarding the Auto Stop menu item.

20

CDR631(U)_Eng_P12-23.p65 20 8/4/00, 9:39 AM