Marantz CDR631 manual Manual start recording, About Auto Track and Auto Stop

RECORDING

The numbers between parentheses refer to the fold-out.

ABC DEF GHI

1 2 3

JKL MN OPQ

4 5 6

RST UVW XYZ

7

8

9

DISPLAY

SPACE

SCROLL

CD RECORDER CDR631

0

REC MODE

TR.INCR.

RANDOM

REPEAT

IR

FUNCTION

DELETE

STORE

CDR

CD

FINAL

ERASE

CANCL

MENU

Recordable

ReWritable

TIME

1

2

3

4

5

PROG

u

POWER

STANDBY

HEADPHONE

LEVEL

6

8

9

0

INPUT

TEXT

7

REC LEVEL/SELECT

0

10

PUSH ENTER

eryu	t	MENU/	ENTER
			CANCEL/
		STORE	DELETE

ENGLISH

Manual start recording

About AUTO TRACK and AUTO STOP

•AUTO TRACK is a function to increment track numbers either manually or automatically.

AUTO TRACK ON : track numbers will be automati- cally incremented according to the source. (See the table on page 19.)

AUTO TRACK OFF : track numbers are manually incremented by pressing TR. INCR. (25) or TRACK INCR. (67).

•When AUTO TRACK is ON, you can also set AUTO STOP function.

AUTO STOP ON : the recording will be stopped auto- matically. (See the Table on page 20.)

AUTO STOP OFF : the recording has to be stopped manually.

Note:

AUTO STOP function is only activated when Manual start re- cording (REC MANUAL mode) is used.

1Make sure the disc is absolutely free of scratches and dust particles.

2Connect a cable from an external source to the CD-Re- corder. (see INSTALLATION page 5 and 6.)

3Press INPUT (10) repeatedly until the selected external source appears on the display (depending on the connec- tion used):

➔	,	or	lights up and	,
		or	appears on the display.

•If or flashes, the digital data is not being received correctly. Check all connections and settings on both the source unit and the CDR631.

5Set the optimal recording level on the CD-Recorder.

1.Play the source first to set the optimal recording level on the CD-Recorder.

2.Rotate the REC LEVEL/SELCT (19) key until, on the Record/Play Level bar, all the blue segments light but the red segments do not light continuously during the loudest passages.

DIGITAL RECORDING : +6dB ~ –63dB

ANALOG RECORDING: 0dB ~ –63dB

3.Stop the source.

•To record a 3-second silence at the start of a track, press 2/; (14) or ; (76) before starting the source.

6To start recording, press 0 (12) on the CD-Recorder and immediately start the source.

The track number and recording time left appear on the display.

•If 9 (13, 81) was pressed within 3 seconds after 0 (12), no recording will take place.

•To check the elapsed recording time, press TIME (7) or DISPLAY (71). (This can also be done during the recording.)

7To stop recording, press 9 (13, 81).

•To pause recording, press 2/; (14) or ; (76).

After recording the display will show	for sev-
eral seconds as it finishes recording.

4With the recorder stopped, press REC MODE (26) three times to enter the Manual Record standby mode.

➔.

Note:

The recorded sound might be distorted when you adjust the recording level above 0dB for digital recording and -12dB for analog recording. The default setting of record level for digital is 0dB and analog is -12dB.

Important:

If you want to play the recorded CD-R disc on any regular CD player, it must first be finalized. See finalizing discs on page 12.

Finalized CD-RW discs play only on CD-RW compatible CD players.

11

CDR631(U)_Eng_P01-11.p65 11 8/4/00, 9:29 AM