Marantz DV-12S1 Getting Started Using Your DVD Player, Playing DVDs, Video CDs and, Load a disc

Getting Started

Using Your DVD

Player

Playing DVDs, Video CDs and

CDs – DVD/Video CD/CD

Before you can start to enjoy the digital audio and video on DVDs, be sure that you have either performed the Setup Navigator procedure described in the previous section or made the necessary settings in the Setup screen menus as outlined in the next section to set up the player to correspond to your home system. Having made these settings, you are now ready to start using the player to enjoy DVDs, Video CDs, and CDs.

2	OPEN/CLOSE		POWER	1
	DISPLAY	F.MEMO	VIDEO ADJ.
	A-B	REPEAT	PROGRAM
	ANGLE	SUBTITLE	AUDIO
	TOP MENU	ENTER	MENU
				5
	RETURN		SETUP
	1	2	3
	4	5	6
	7	8	9
	SEARCH	0	+10
				4
	CLEAR		LAST MEMO
			CONDITION
			MEMO

RC-12DVS1

1	3	2 4
		DVD PLAYER DV-12S1	PLAY	STOP	PAUSE
	VIDEO ON/OFF	OPEN/CLOSE
DIMMER	RANDOM
POWER
	STANDBY	FL OFF

ENGLISH

1 Press Power button on the front panel.

•Press the POWER button on the Front panel to turn the power on, and press it again to turn the power off.

Note

When it is required to remote control the power mode of this DVD player, be sure to leave this switch in the power on mode.

2 Press OPEN/CLOSE.

The disc tray comes out.

3 Load a disc.

•Load a disc with the label side facing up, using the disc tray guide to align the disc.

	VCD CD
	DVD
	STOP
	PLAY
	DV-12S1
	PLAYER
	DVD	Getting	Setting
	ON/OFF
	VIDEO
4 Press PLAY 3.		StartedUsing	Up thePlayer
•	The disc tray closes, and playback begins.
•	Depending on the disc, a menu may be displayed.	Your	/
	If a menu is displayed, proceed to step 5.
		DVD
5 Select the item you want to view.
•	When a DVD is loaded:	Player
	Select the item with the cursor control joystick or the

number buttons then press ENTER.

• When a Video CD is loaded:

Use the number buttons to select the item.

Notes

•Noise is output if you make digital audio connections to a receiver or amplifier that does not have a built-in decoder. Check that the digital audio output format selected in the

Audio 1 menu corresponds to the audio components you have made connections to (pages 31-32).

•The TV screen size is factory set to present the wide screen format (16:9 aspect ratio). If you have a standard TV screen (4:3 aspect ratio), this setting can be changed to match your TV screen size in the Video menu (page 36).

When an operation is prohibited

There are times when you are using the player and attempt to perform an operation, but for some reason it cannot be performed. When this occurs, one of the two following icons appears on the screen.

The operation is prohibited by the player.

The operation is prohibited by the programming on the disc.

25