Setting the OSD Language On-Screen Display Language, Output

Setting the OSD Language (On-Screen Display Language)

The [OSD Language] screen establishes the OSD language, or on-screen display language, which refers to the language that is used by the player in menus and

on-screen messages. Additionally, the language that is established at this setting will also be used for the default audio and subtitle language.

Audio1 Audio2 Video LanguageGeneral

Setup Navigator

Language English

OSD Language français

Español

Select the On Screen Language

Move ENTER Select SETUP Exit

Settings: English*

français

Español

* Factory setting

Notes

•The languages that can be selected may be different from those shown above.

•In addition to setting the [OSD Language], the audio and subtitle language are also set at this time. If you wish to change the audio or subtitle language to a different language, make changes in the Setup screen Language menu [Audio Language] and [Subtitle Language] as needed (page 41, 42).

Setting the TV screen size

The [TV Type] screen establishes the size, or more appropriately the width to height ratio of your television or monitor. The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and high- definition TVs is 16:9. This width-to-height ratio is called the aspect ratio.

Audio1 Audio2 Video LanguageGeneral

Setup Navigator

TV Connection

TV Type Widescreen (16:9)

Standard (4:3)

Widescreen TV 16:9 aspect ratio

Move ENTER Select SETUP Exit

Settings: Widescreen (16:9)*

Standard (4:3)

* Factory setting

Note

There are two screen formats that can be used to display wide-screen format DVDs: letter box and pan & scan. When [Standard (4:3)] is selected in the Setup Navigator, the letter box screen format is automatically selected. To switch the preference to the pan & scan format, make changes in the Setup screen Video menu [TV Screen] setting (page 36).

ENGLISH

Setting analog audio connections to an AV amplifier or receiver

The [Analog Jacks] screen establishes whether analog connections have been made to an AV amplifier or receiver, and if connections are made, whether the connections made are for 2 channel stereo or for 5.1 channel surround sound.

Audio1 Audio2 Video LanguageGeneral

	Setup Navigator
	Amp Connection
	Amp Connection		2 Channel
	Analog Jacks		5.1 Channel
			Not Connected

2 channel jacks for L/R

Move ENTER Select SETUP Exit

	Settings: 2 Channel*
	Select if you have made 2 channel connections to
	an amplifier or receiver.
	5.1 Channel
	Select if you have made 5.1 channel connections
	to an AV amplifier or receiver with the appropriate
	to an AV amplifier or receiver with the appropriate
	inputs. When this setting is selected, several
	screens will follow to determine the configuration
	of your speaker system. These screens are
	of your speaker system. These screens are	Setting
	described in the section ‘To coordinate your	Setting
	speaker system for 5.1 channel output’ on this
	page.
	Not Connected	Up
	Select if you have not made connections to an	Up
	Select if you have not made connections to an	the
	amplifier or receiver or if you have made stereo	the
	amplifier or receiver or if you have made stereo
	connections to a TV or monitor.	Player
	To coordinate your speaker system for 5.1 channel	Player
	To coordinate your speaker system for 5.1 channel

output

When [5.1 Channel] is selected in the [Analog Jacks] screen, the following screens appear to determine the configuration of your speaker system. In all of the following screens, select [Present] if the speaker in question is present in your system, and [Not Present] if it is not.

[Center Speaker]

Audio1 Audio2 Video LanguageGeneral