Marantz DV6600 Connection to 5.1-channel Surround Sound System, Front speaker Right Subwoofer

CONNECTIONS

Connection to 5.1-channel Surround Sound System

Analog 5.1-channel audio signals can be output from the DVD player.

The multichannel audio signals recorded in packed PCM can be played back when an AV amplifier equipped with analog 5.1-channel audio inputs is connected.

Center speaker

Front speaker

(left)

Surround

speaker

(left)

AUDIO

Front speaker

(right)

Subwoofer

AV amplifier	Surround
with	speaker
5.1-channel
	(right)
input jacks

To 5.1CH

Audio Input

Jacks

Audio Cable

(commercially

available)

5.1CH AUDIO OUT

DVD

5.1CH

AUDIO OUT

NOTES:

•For 5.1-channel connections, set “ANALOG AUDIO” to “5.1CH” in the setup mode and adjust “SPEAKER SIZE”, “DELAY TIME” and “BALANCE” settings (refer to pages 29-30).

•You can enjoy high-quality analog sound by cutting off analog video signals. Press the AUDIO EX. button on the front panel.

•When using the HDMI connection, signals from the 5.1CH AUDIO OUT jacks can be limited in some cases. If it occurs, set “HDMI AUDIO” to “OFF” to output the signals (refer to pages 28-29).

“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

– 14 – EN