Marantz DV6600 manual Speaker Setting for Analog Audio, Speaker Size

DVD SETUP

•The sound of DVD-Audio which exceeds 96kHz(or 88.2kHz) will be output as 96kHz (or 88.2kHz) even if DOWN SAMPLING is set to OFF.

When playing disc with copyright protection

•The sound will be down-sampled at 48kHz (or 44.1kHz), even if you set to OFF.

DOLBY DIGITAL (Default: BITSTREAM) QUICK

2CH PCM:

2 channel signals are output from the HDMI OUT terminal.

Suitable for monitors or projectors compatible with HDMI 2CH.

OFF: No audio signals are output from the HDMI OUT terminal.

To use the 5.1CH AUDIO OUT jacks.

English

• Set to BITSTREAM when the player is connected to a Dolby

Digital decoder.	AUDIO
	DRC	ON
• This function is effective only for
	DOLBY DIGITAL	BITSTREAM
	DOWN SAMPLING	ON
the COAXIAL and OPTICAL con-	DTS	BITSTREAM
	HDMI AUDIO	AUTO
	MPEG	PCM
nections.	ANALOG AUDIO	2.0CH

• When HDMI AUDIO is set to

AUTO, this setting is fixed and cannot be changed in

ANALOG AUDIO (Default: 2.0CH)

•This setting may not be changed depending on the HDMI connection. Set HDMI AUDIO to OFF if it occurs.

2.0CH: Output 2ch sound from the 5.1CH AUDIO OUT jacks.

AUDIO

DRC	ON
DOWN SAMPLING	ON
DOLBY DIGITAL	BITSTREAM
DTS	BITSTREAM
MPEG	PCM
HDMI AUDIO	AUTO
ANALOG AUDIO	2.0CH

some cases.

BITSTREAM: Output by Dolby Digital.

PCM: Convert Dolby Digital to PCM.

5.1CH: Output multi channel sound from the 5.1CH AUDIO OUT jacks.

5Press the SETUP button to exit.

DTS (Default: BITSTREAM) QUICK

• Set to BITSTREAM when the unit

is connected to a DTS decoder.

• This function is effective only for

the COAXIAL and OPTICAL con-

nections.

• When HDMI AUDIO is set to

AUDIO

DRC	ON
DOWN SAMPLING	ON
DOLBY DIGITAL	BITSTREAM
DTS	BITSTREAM
MPEG	PCM
HDMI AUDIO	AUTO
ANALOG AUDIO	2.0CH

Speaker Setting for ANALOG AUDIO

When 5.1CH is selected for ANALOG AUDIO, some speaker settings will be required.

•During the HDMI output mode, any of the Speaker Setting is ineffective.

1Press the Cursor buttons (K or L) to select 5.1CH, then press the ENTER button.

AUTO, this setting is fixed and

cannot be changed in some cases.

BITSTREAM: Output DTS sound.

PCM: Convert DTS sound to PCM.

2Press the Cursor buttons (K or L) to select the below items, then press the ENTER button.

AUDIO 5.1CH

SPEAKER SIZE DELAY TIME

MPEG (Default: PCM) QUICK

• Set to BITSTREAM when the unit

is connected to an MPEG	AUDIO
	DRC	ON
decoder.	DOLBY DIGITAL	BITSTREAM
	DOWN SAMPLING	ON
• This function is effective only for	DTS	BITSTREAM
	HDMI AUDIO	AUTO
	MPEG	PCM
the COAXIAL and OPTICAL con-	ANALOG AUDIO	2.0CH
nections.

•When HDMI AUDIO is set to AUTO, this setting is fixed

SPEAKER SIZE

•Press the Cursor buttons (K or L) to select the speaker to set.

•Press ENTER until the desired speaker size appears.

BALANCE

AUDIO

SPEAKER SIZE

FRONT (L/R)	LARGE
CENTER	LARGE
SUB WOOFER	ON
SURROUND (L/R)	LARGE

and cannot be changed in some cases. BITSTREAM: Output MPEG sound. PCM: Convert MPEG sound to PCM.

NOTE:

•Audio Settings for DOLBY DIGITAL, DTS and MPEG may be automatically changed to BITSTREAM or PCM in some cases when using the HDMI connection.

HDMI AUDIO (Default: AUTO)

• Select the number of channels

for the HDMI audio output.	AUDIO
• Refer to the table on page 16 for	HDMI AUDIO
	AUTO
the actual output settings.
	2CH PCM
• Connect appropriate external	MULTI PCM
	OFF

equipment for each setting.

•This setting cannot be changed when no equipment compatible with HDMI audio is connected to the HDMI OUT terminal.

•Even if an equipment compatible with HDMI audio is connected, this setting cannot be changed when the equipment is turned off or the HDMI output mode is set to hdOFF.

AUTO: The output channel number is selected automati- cally from Bitstream, Multi-channel or 2-channel. Suitable for monitors or amplifiers compatible with HDMI bitstream.

MULTI PCM:

Multi-channel or 2-channel signals are output from the HDMI OUT terminal.

Suitable for monitors or amplifiers incompatible with HDMI bitstream.

FRONT(L/R), CENTER, SURROUND(L/R) (Default: LARGE)

LARGE:Select this when the connected speaker is capable of playing back sounds of 100Hz or less.

SMALL: Select this when the connected speaker is not capable of playing back sounds of 100Hz or less.

OFF: Select this when it is not connected. (It cannot be set OFF on the FRONT speaker.)

SUB WOOFER (Default: ON)

ON: Select this when SUB WOOFER is connected.

OFF: Select this when it is not connected.

NOTES:

•OFF is not available for SUB WOOFER when SMALL is selected for FRONT(L/R).

•SMALL is not available for FRONT(L/R) when OFF is selected for SUB WOOFER.

•During DVD-Audio playback, the sound may not come out as setting due to restrictions in the disc or the play- er.

•During DVD-Audio playback, the Low Pass Filter (which filters out the sound with the sound wave frequency over 100Hz) of the SUB WOOFER will be turned off with the following speaker setting. Otherwise, the Low Pass Filter will be turned on.

FRONT(L/R): LARGE

CENTER: LARGE

SUB WOOFER: ON

SURROUND(L/R): LARGE

– 29 – EN